Border Intrusion Warning Solution
1. Solution Overview
This solution uses Long-distance Linear Vibration Sensing technology, deployed along border fiber cables with three-level zone warning defense lines. By continuously sensing vibration disturbances along the fiber, it achieves graded and progressive warnings from far to near, distinguishing foot intrusion, vehicle movement, animal disturbance, and weather/geological interference, enabling 24/7 long-distance unattended border intrusion monitoring; supported by actual measurement data tables and deployment diagrams.
Core advantages: No active electronic front-end, anti-EMI, resistant to high/low temperatures, ultra-long distance continuous monitoring, suitable for complex wild border terrain; two installation methods: buried/overhead cable available.
2. Three-Level Interval Warning Mechanism
Along the border control line, sensing fiber cables are laid in parallel, divided into three longitudinal defense lines: warning zone, pre-warning zone, and alarm zone, determining intrusion threat levels step by step:
Level 1: Long-distance Vigilance Warning
When disturbance enters the outer vigilance zone, the system generates a pre-warning, marks the location and continuously tracks it without triggering urgent audible/visual alarms. Backend staff verify the event and filter low-risk interference such as birds and small wild animals.
Level 2: Mid-distance Warning
When disturbance continues toward the border and enters the middle zone, Level 2 warning is triggered, with popup positioning, video/vibration waveform storage, and patrol personnel assigned to focus on the target.
Level 3: Short-distance Border Alarm (Emergency Response)
When disturbance reaches the zone near the core border control line, Level 3 emergency alarm is triggered, linking video surveillance, broadcast announcements, on-site audible/visual alarms, and pushing coordinate information to border patrol terminals.
3. Standard Defense Line Spacing Parameters
Note: For flat and open borders, the standard spacing in the table above is recommended; for mountainous, gully, and dense forest areas, spacing can be reduced (overall 20%~30% reduction); for Gobi desert areas with good visibility, spacing can be appropriately increased.
4. Key Technical Specifications of Long-distance Linear Vibration Sensing System
Solution diagram is as follows:
5. Workflow
- The target generates vibration signals, transmitted along the sensing fiber to the DAS demodulation device;
- Obtain precise geographical location of disturbance in real time;
- Software determines which zone of the three defense lines the disturbance coordinates belong to;
- Trigger the corresponding warning strategy based on the zone level;
- AI algorithm continuously tracks the target movement trajectory and predicts whether the target continues approaching the border;
- Multi-system linkage: automatically retrieves video at corresponding location, retains full-process data, supports post-incident forensics.
6. Solution Adaptation and Optimization
- Windy, densely vegetated borders: equipped with environment-adaptive AI filtering algorithm to reduce false warnings caused by wind-blown vegetation;
- Areas with active wildlife: trained animal vibration sample library to distinguish humans from animals, reducing invalid alarms;
- Ultra-long border lines: multiple DAS devices for segmented networking, unified access to the border control platform.
7. Optional Extended Features
Can be overlaid with Long-range Linear Optical Sensing to simultaneously monitor fire and human-caused burning damage along the cable, achieving integrated border sensing of vibration intrusion + temperature fire protection (ADAT Power mature combination technology).