8. Old Substation Fire Protection Renovation (Uninterrupted Intelligent Monitoring)

1. Background: The Real Challenge of Fire Protection Renovation in Old Substations

The installed base of aging substations is currently very large, and maintenance and monitoring needs are increasingly becoming unavoidable requirements driven by distribution reliability demands and equipment asset management needs.

For in-service substations, the biggest pain point of renovation is not equipment replacement itself, but the inability to sustain long power outages, cramped construction space, the need to be compatible with existing fire alarm control panels, and the need to satisfy stringent fire codes. Ensuring power supply continuity while completing the iteration from traditional non-addressable systems to intelligent addressable fire protection systems has become a real challenge for many power O&M organizations. Based on a previous overseas 35kV substation case, this article provides a practical and feasible solution.

2. Long-distance Linear Optical Sensing System (LLOS)

(1) Lightweight Hardware Deployment, Adapted to On-site Renovation Conditions

The project covers a total sensing distance of 1.3km, deploying 5 independent LLOS demodulation hosts. Each substation is equipped with one short-range independent LLOS unit, focusing on protecting high-risk fire zones such as 35kV and 10kV transformer rooms, low-voltage transformer rooms, and sprinkler pump houses.

The 4mm-diameter flexible temperature-sensing optical cable is lightweight and highly pliable, routed flexibly along indoor walls and equipment perimeters with stainless steel clips, easily adapting to complex wiring scenarios such as room corners and pipe detours—ideal for retrofit construction of existing projects. The LLOS host uses a wall-mount enclosure installed alongside the existing local fire alarm control panel, requiring no modification of the equipment room cabinet, with simple and efficient on-site installation procedures.

(2) Seamless Integration with Existing Systems, Protecting Prior Investments

The renovation does not replace the existing fire alarm control panel. The LLOS host interfaces with the existing FACP via passive dry contacts, directly uploading fire alarm and equipment fault status signals; it also supports the standard Modbus industrial protocol, enabling integration with SCADA platforms and coordinated interlocking with other monitoring systems in the station, maximizing utilization of existing hardware and software assets and avoiding duplicate investment.

Each LLOS demodulation unit is equipped with a built-in backup battery. In the event of on-site power loss, it automatically switches to battery power, ensuring uninterrupted fire detection and monitoring, eliminating fire monitoring blind spots caused by power outages.

(3) Zone-level Localization Monitoring, Meeting Fire Compliance Requirements

Each functional room of the substation is divided into an independent fire detection zone. The fiber optic LLOS system can report the precise location of a fire to the FACP in real time, eliminating the traditional system's shortcoming of "alarm only, cannot locate the fire source," enabling O&M personnel to quickly respond to hazardous situations.

3. Customer Value

  • ● EMI immunity: The Long-distance Linear Optical Sensing System (LLOS) measures temperature using optical signals. The sensing optical cable itself contains no electronic components, achieving electromagnetic interference (EMI) immunity at the source. In the complex electromagnetic environment of high-voltage substations, it eliminates false alarms caused by electromagnetic interference, providing stable and reliable detection.
  • ● Maintenance-free long service life: System mean time between failures (MTBF) > 30 years, with extremely low industry failure rates, drastically reducing later inspection and calibration workload;
  • ● Wide-range fire monitoring: capable of monitoring temperatures up to 550°C, capturing early-stage equipment overheating hazards as well as outputting effective signals during open-flame stages to interlock and initiate fire response measures such as sprinkler activation;
  • ● 24/7/365 all-weather real-time monitoring, continuously sensing temperature changes along the entire line, transforming passive firefighting into proactive early warning.

Related Product Solutions

Facebook WhatsApp Business WeChat Email