How to Prevent Solar PV Array Fires: Incident Review, Root Causes & Long-Range Optical Sensing Monitoring
Introduction
Global solar PV installed capacity continues to grow, and PV farm fires now cause substantial property loss, project downtime, and severe safety hazards. This article reviews major PV fire incidents worldwide over the past five years, analyzes the root causes behind solar panel fires, compares the limitations of conventional monitoring methods, and introduces the Long Range Optical Sensing Device—also known as a DTS (Distributed Temperature Sensing) system. This system identifies hidden hot spots before electric arcs or open flames develop, preventing PV fire outbreaks at the source.
Core keywords: PV fire prevention, solar panel fire, distributed temperature sensing, DTS, hot spot monitoring, long range optical sensing device, photovoltaic DC arc fault.
Notable Global PV Fire Incidents of the Past 5 Years
1. 2022, Los Angeles, USA — 6 MW Rooftop PV Fire at a Cold-Storage Warehouse
Scenario: Commercial rooftop PV array.
Incident summary: Fire broke out on the rooftop solar array and burned for eight full days before it was fully contained. All refrigerated inventory inside the warehouse was destroyed, and the building structure sustained critical damage. Operators filed insurance claims exceeding $100 million.
Post-incident finding: More than 200 connector overheating faults existed on site before ignition. These slow-developing thermal hazards went undetected, eventually creating a DC electric arc that ignited the PV backsheets and EVA encapsulant film.
2. 2024, Spain — Utility-Scale Ground-Mounted PV Farm Fire
Scenario: Utility-scale ground-mounted solar farm.
Incident summary: Aging and loose MC4 connectors raised contact resistance and generated DC arcing. Flames spread along the DC cables and burned out an entire string of PV modules.
Post-incident finding: Periodic manual infrared thermal imaging inspections failed to detect hidden hot spots on the cables underneath the PV panels.
3. 2023, Australia — Commercial Rooftop PV Fire
Scenario: Commercial rooftop PV installed over combustible roof insulation.
Incident summary: Overheated terminals inside combiner boxes and inverters ignited the roof insulation material.
Why this case stands out: The PV DC side operates at high voltage. Unlike AC arcs, DC arcs cannot self-extinguish, so fires spread far faster than a standard electrical fire.
Root Causes of Solar Panel Fires
Most PV fires do not start with an instantaneous panel explosion. Instead, hidden hot spots build up gradually, evolve into DC electric arcs, and ultimately ignite the polymer materials in PV assemblies and cables. Four primary root triggers are responsible:
- Poorly crimped, aged, or loose MC4 connectors: rising contact resistance creates a persistent localized hot spot.
- PV module hot spot effect: shading from dust, bird droppings, or vegetation damages bypass diodes and creates permanent localized overheating.
- Aged or damaged DC cable insulation: triggers DC arcing. DC arcs reach thousands of degrees Celsius and lack any self-extinguishing property.
- Overloaded terminals inside combiner boxes and inverters.
The Solution: Long Range Optical Sensing Device (Distributed Fiber Optic DTS System)
The Long Range Optical Sensing Device, also known as a DTS (Distributed Temperature Sensing) system, operates on Raman scattering and OTDR (Optical Time Domain Reflectometry) technology. The optical fiber itself acts as a continuous linear sensor, measuring temperature uninterrupted along the entire fiber route.
Core Product Features
- Passive fiber sensing: The fiber carries no electrical power. It has zero short-circuit risk in high-voltage DC PV environments and is inherently safe for outdoor dusty, humid, and wide-temperature operating conditions.
- Long-distance coverage: A single channel supports multi-kilometer coverage for utility-scale ground farms and long-span rooftop PV projects.
- Continuous hot spot localization: Fiber is routed along PV module rows, DC cable trays, MC4 connector zones, and combiner boxes, delivering meter-level positioning to pinpoint every rising-temperature hot spot.
- 24/7 continuous monitoring: Real-time temperature tracking around the clock. Alarms activate automatically during abnormal temperature rise—before dangerous DC arcs form.
- Platform integration: Connects seamlessly with SCADA and solar O&M platforms to push remote alerts, eliminating reliance on manual site visits to discover hazards.
Value Summary
The Long Range Optical Sensing Device is not a post-fire suppression alarm. It detects hidden thermal hazards early, before hazardous DC arcs develop, reducing PV fire risk at the source and lowering asset loss, insurance claim exposure, and long-term O&M costs.
Explore our Long Range Optical Sensing System and Fire Detection solutions for early PV hot spot monitoring.
Frequently Asked Questions
Q: What is the leading cause of PV fires?
A: The primary trigger is hidden overheating hot spots in MC4 connectors and DC cables. These hot spots progress into non-self-extinguishing DC arcs, which ignite PV backsheets and cable insulation.
Q: Why can infrared thermal cameras alone not fully prevent PV farm fires?
A: Infrared thermal imaging is a periodic inspection technology and cannot provide 24/7 live monitoring. Cables and connectors underneath PV panels are visually blocked, so buried hot spots remain undetectable.
Q: Is the Long Range Optical Sensing Device (DTS) suitable for rooftop PV projects?
A: Yes. Temperature-sensing fiber can be routed along rooftop PV modules and DC cable paths, delivering continuous full-array temperature monitoring for early warning of hot spots and connector overheating failures.